Introduction, Key features, Table 2-1 xport pro part numbers – Lantronix XPORT PROTM 900-560 User Manual
Page 15: Chapter 2: introduction
XPort Pro User Guide
15
2:
Introduction
This chapter introduces the Lantronix . It provides an overview of the products, lists their key
features, and describes the applications for which they are suited.
The
XPort Pro
embedded Ethernet Device Server is a complete network-enabling solution in a
13.50 (0.531) X 16.25 (0.640) X 33.90 (1.335) package. This miniature device server empowers
original equipment manufacturers (OEMs) to go to market quickly and easily with Ethernet
networking and web page serving capabilities built into their products. [DIMS = mm (in.)]
This chapter contains the following sections:
Key Features
Note:
Consult the Integration Guide for more detailed hardware information.
Power Supply: Regulated 3.3V input
required.
Controller: A Lantronix DSTni-EX CPU
with 256 kilobytes (KB) zero wait state
SRAM and 16 KB of boot ROM.
Memory: 16 MB Flash and 8/16 MB
SDRAM (see
to the right).
Temperature Range: Operates over an
extended temperature range of -40°C to
+85°C.
Ethernet: 10/100 megabits per second
(Mbps) Ethernet transceiver
Serial Ports: One full RS232-supporting
high-speed serial port with all hardware
handshaking signals. Baud rate is
software selectable
(300 bps to 921600 bps).
Note:
The standard baud rate of 460800 bps is not supported.
Configurable IO Pins (CPs): Up to three pins are configurable as general purpose I/Os if no
modem control signal is used on serial ports. Not 5V tolerant.
Interface Signals: 3.3V-level interface signals.
Table 2-1
XPort Pro Part Numbers
Part Numbers
SDRAM
Operating System
XPP1002000-01R
8 MB
Evolution
XPP100200S-01R
8 MB
Evolution
XPPDK1000-EVO-01
8 MB
Evolution
XPP1002000-02R
16 MB
Evolution
XPP100200S-02R
16 MB
Evolution
XPPDK1000-EVO-02
16 MB
Evolution
XPP1003000-01R
8 MB
Linux
XPP100300S-01R
8 MB
Linux
XPPDK1000-LNX-01
8 MB
Linux
XPP1003000-02R
16 MB
Linux
XPP100300S-02R
16 MB
Linux
XPPDK1000-LNX-02
16 MB
Linux