Lantronix XPORT PROTM 900-560 - Manual (Page 62)

8: Configurable Pin Manager
XPort Pro User Guide 62
3. (If necessary) Select the Assert Low checkbox.
4. Click Change.
Note: These changes to a CP are not saved in FLASH. Instead, these settings are used
when the CP is added to a CP Group. When the CP Group is saved, its CP settings are
saved with it. Thus, a particular CP may be defined as “Input” in one group but as
“Output” in another. Only one group containing a particular CP may be enabled at once.
CPM: Groups
The CP Groups page allows for the adding, removing and managing of CP groups. Groups can be
created or deleted. CPs can be added to or removed from groups. A group, based on its state,
can trigger outside events such as sending email messages. Only an enabled group can be a
trigger.
View Groups
1. Select CPM on the menu bar and then Groups at the top of the page. The CPM: Groups page
appears.
Figure 8-4 CPM: Groups
2. The Current Configuration table shows the current settings for each CP group.