Lantronix XPORT PROTM 900-560 - Manual (Page 22)

3: Using DeviceInstaller
XPort Pro User Guide 22
Device Family Shows the XPort Pro device family type as “XPort”.
Type Shows the specific device type, such as “XPort Pro”.
ID Shows the XPort Pro ID embedded within the unit.
Hardware Address Shows the XPort Pro hardware (MAC) address.
Firmware Version Shows the firmware currently installed on the XPort Pro.
Extended Firmware Version Provides additional information on the firmware version.
Online Status Shows the XPort Pro status as Online, Offline, Unreachable (the XPort
Pro is on a different subnet), or Busy (the XPort Pro is currently
performing a task).
IP Address Shows the XPort Pro current IP address. To change the IP address,
click the Assign IP button on the DeviceInstaller menu bar.
IP Address was Obtained Displays “Dynamically” if the XPort Pro automatically received an IP
address (e.g., from DHCP). Displays “Statically” if the IP address was
configured manually.
If the IP address was assigned dynamically, the following fields
appear:
 Obtain via DHCP with value of True or False.
 Obtain via BOOTP with value of True or False.
Subnet Mask Shows the subnet mask specifying the network segment on which the
XPort Pro resides.
Gateway Shows the IP address of the router of this network. There is no default.
Number of Ports Shows the number of serial ports on this XPort Pro.
Supports Configurable Pins Shows True, indicating configurable pins are available on the XPort
Pro.
Supports Email Triggers Shows True, indicating email triggers are available on the XPort Pro.
Telnet Enabled Indicates whether Telnet is enabled on this XPort Pro.
Telnet Port Shows the XPort Pro port for Telnet sessions.
Web Enabled Indicates whether Web Manager access is enabled on this XPort Pro.
Web Port Shows the XPort Pro port for Web Manager configuration.
Firmware Upgradable Shows True, indicating the XPort Pro firmware is upgradable as newer
versions become available.
Current Settings (continued) Description