Lantronix XPORT PROTM 900-560 - Manual (Page 47)

6: Line and Tunnel Settings
XPort Pro User Guide 47
 Modem Control Asserted
A connection is attempted when the modem control pin is asserted in the serial line.
 Modem Emulation
A connection is attempted by an ATD command.
To configure Connect Mode for a specific tunnel:
1. Select Tunnel on the menu bar, if you are not already in the Tunnel web page.
2. Select a tunnel number at the top of the page.
3. Select Connect Mode. The Connect Mode page for the specific tunnel appears.
Figure 6-15 Tunnel 1 - Connect
Note: The VIP and Host
Mode options are supported
in all products except XPort
AR.
The CP Output option is
only supported in XPort Pro
and XPort AR.