Lucent Technologies Uninterruptible Power Systems 3000 VA - Manual (Page 37)

Installation 3
Lucent Technologies Model 3000 UPS Operator's Manual (167Ć405Ć119 Issue 3)
27
REPO
Receptacle
Breaker Tie
UPS Module
Battery
Circuit
Breaker
Battery Module
Battery
Connector
Power Input
Connector
Serial Port
External
Battery
Connector
Battery Cord
BIM (50 Hz)
YĆCord
Utility Input
Connector
Output Breaker
Power Output
Receptacles
Bypass Switch
427.79 mm
(16.84I)
251.6 mm
(9.91I)
Depth of Unit:
400.0 mm (15.75I)
Input Breaker
Input Circuit
Protector
Power Output
Receptacle
Tie Wrap
Mounts
Figure 6. UPS with BIM Rear Panel
6 Make sure the circuit breaker on all batterymodules is in the OFF (O)
position.
7 Remove the batteryconnector guard. Plug the batterycord into the battery
connector on the UPS. All batteryconnectors are polarized to prevent
incorrect connection.