Lucent Technologies Uninterruptible Power Systems 3000 VA - Manual (Page 60)

Communication 5
Lucent Technologies Model 3000 UPS Operator's Manual (167Ć405Ć119 Issue 3) 50
1 > UTIL_FAIL is active closed, LOW_BATT is active closed
SELECT CUSTOM LAN CONFIGURATION
ENTER SELECTION >=>
2
3
4
Q
>
>
>
>
UTIL_FAIL is active open, LOW_BATT is active closed
UTIL_FAIL is active closed, LOW_BATT is active open
UTIL_FAIL is active open, LOW_BATT is active open
TO QUIT THIS MENU
Instructions: Choose the desired contact configuration.
Z > Set Baud Rate allows you to select a new baud rate. The Select Baud
Rate Menu displays a list of baud rate options.
SELECT BAUD RATE
2 > 300
ENTER SELECTION >–>
4
5
6
7
8
Q >
>
>
>
>
> 1200
2400
4800
9600
19200
QUIT THIS MENU
5 To save the configuration settings, type S at the Main Menu prompt. The
UPS operates and communicates under the newconfiguration, and defaults
to these settings each time it is started.
If you want to abandon the selections you have made, type Q to quit.
NOTE Anychanges you make to the UPS communications configuration must
correspond to the communications equipment you are using. In particular, new baud
rate selections for the UPS must match your communications equipment.
i