Lucent Technologies Uninterruptible Power Systems 3000 VA - Manual (Page 52)

UPS Operation 4
Lucent Technologies Model 3000 UPS Operator's Manual (167Ć405Ć119 Issue 3) 42
3 Remove the cord connections to the back of the UPS.
The UPS enters Battery Mode for several seconds. The

Indicator turns
off and the UPS shuts down.
4 Turn the circuit breaker on all battery cabinets to the OFF (O) position.
5 Disconnect the battery connector located on the UPS rear panel.
6 Remove the UPS.
BDM
(60 Hz)
UPS Module
Battery
Circuit
Breaker
Battery
Module
Bypass
Switch
Battery
Connector
Power Output
Receptacle
Power Input
Connector
YĆCord
Figure 18. UPS with Bypass Module Rear Panel (60ĆHz BDM Shown)