Lucent Technologies Uninterruptible Power Systems 3000 VA - Manual (Page 55)

OĂĂMĂĂMĂĂUĂĂNĂĂIĂĂCĂĂAĂĂTĂĂIĂĂOĂĂN C 5
CHAPTER
Lucent Technologies Model 3000 UPS Operator's Manual (167Ć405Ć119 Issue 3)
45
Communication
The UPS is equippedwith a communications interface port that allows
communication with a wide variety of external devices including:
H Video or dumb terminal
H Serial printer
H Computer with power management or shutdown software
The serial port enables you to monitor andrecorddiagnostic data with the
following communication interfaces:
H Serial Communications Interface
Terminal Mode
Data Dump Mode
Printer Mode, 2400 Baud, with Novell Contacts (default)
Printer Mode, 19200 Baud, with Novell Contacts
H LAN Configuration
Novell-Style Network Interface
3Com-Style Network Interface
AS/400-Style Network Interface
Custom UserĆConfigurable Interface
Initial Communications Settings
The UPS is factoryĆconfigured for Printer Mode, 2400 baud, with Novell contacts.
To verify the initial UPS communications configuration, you can:
H Look at the box label with the serial number (communication mode is
shown in the upper right corner).
H Use the Display Configuration option on the UPS Serial Communications
Menu (see page 47).
If you want to change the UPS configuration settings, use the front panel or the UPS
Serial Communications Menu.
R
R
R