Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 101)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
Enter WAN1 Parameters
VPI: 0
VCI: 32
Click LLC
Click Next
The screen will prompt the new configured parameters. Check the parameters and Click Restart
The router will reboot with the new setting.
6.6.1.2 CPE Side
lick Bridge and CPE Side to setup Bridge mode of the Router and then click Next.
C
nter LAN Parameters E
IP: 192.168.0.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.2
Host Name: SOHO
Enter WAN1 Parameters
VPI: 0
VCI: 32
Click LLC
Click Next
The screen will prompt the new configured parameters. Check the parameters and Click Restart
The router will reboot with the new setting.
100