Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 128)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
7.9.3 SNMP
Simple Network Management Protocol (SNMP) is the protocol not only governing network
management, but also the monitoring of network devices and their functions.
The router can generate SNMP traps to indicate alarm conditions, and it relies on SNMP
community strings to implement SNMP security. This router support MIB I & II.
Move the cursor “ >> “ to snmp and press enter.
>> community
Configure community parameter
trap Configure trap host parameter
5 entries of SNMP community can be configured in this system.
Move the cursor to community and press enter.
----------------------------------------------------------------------
Command: admin snmp community <1~5> <more...>
Message: Please input the following information.
Community entry number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow:
>> edit
Edit community entry
list Show community configuration
Move the cursor to edit and press enter. You can setup the following:
Validate : Set Enable or Disable
Community : Key in the string
Access right : Set Read only, Read Write or Denied
Move the cursor to list and press enter, you can view full listing on SNMP Community Pool.
5 entries of SNMP trap are allowed to be configured in this system.
Move the cursor to trap and press enter.
----------------------------------------------------------------------
Command: admin snmp trap <1~5> <more...>
Message: Please input the following information.
Trap host entry number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow:
>> edit
Edit trap host parameter
list Show trap configuration
127