Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 108)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
The following table shows the parameters in the brackets.
Command Description
<ip> An item enclosed in brackets is required. If the item is shown in lower
case bold, it represents an object with special format. For example,
<ip> may be 192.168.0.3.
<Route|Bridge> Two or more items enclosed in brackets and separated by vertical
bars means that you must choose exactly one of the items. If the item
is shown in lower case bold with leading capital letter, it is a command
parameter. For example, Route is a command parameter in
<Route|Bridge> .
[1~1999] An item enclosed in brackets is optional.
[1~65534|-t] Two or more items enclosed in brackets and separated by vertical
bars means that you can choose one or none of the items.
7.1.5 Menu Driven Interface Commands
Before changing the configuration, familiarize yourself with the operations list in the following table.
The operation list will be shown on the window.
Menu Driven Interface Commands
Keystroke Description
[UP] or I Move to above field in the same level menu.
[DOWN] or K
U
O Move to below field in the same level menu.
Move to top field in the same level menu
Move to bottom field in the same level menu
[LEFT] or J Move back to previous menu
[RIGHT] or L Move forward to submenu
[ENTER] Move forward to submenu
[TAB] To choose another parameters
Ctrl + C To quit the configuring item
Ctrl + D
Ctrl + U
Ctrl + Q Disconnection
Hot-key switch to command line interface
Display help menu
107