Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 151)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
7.12.14 DNS proxy
Enter the IP address via DNS proxy command. Move cursor “ >> “ to dns_proxy and press enter.
----------------------------------------------------------------------
Command: setup dns_proxy <IP> [IP] [IP]
Message: Please input the following information.
DNS server 1 (ENTER for default) <168.95.1.1>: 10.0.10.1
DNS server 2: 10.10.10.1
DNS server 3:
----------------------------------------------------------------------
You can setup three DNS servers in the router. The number 2 and 3 DNS servers are option.
7.12.15 Host name
A Host Name is the unique name by which a network-attached. The hostname is used to identify a
particular host in various forms of electronic communication.
Enter local host name via hostname command. Move cursor “ >> “ to hostname and press enter.
----------------------------------------------------------------------
Command: setup hostname <name>
Message: Please input the following information.
Local hostname (ENTER for default) <SOHO>: test
----------------------------------------------------------------------
The host name can’t use more than 15 characters and don’t use space character.
Some of the ISP requires the Host Name as identification. You may check with ISP to see if your
Internet service has been configured with a host name. In most cases, this field can be ignored.
7.12.16 Default
If you want to restore factory default, first move the cursor “ >> “ to default and then press enter.
----------------------------------------------------------------------
Command: setup default <name>
Message: Please input the following information.
Are you sure? (Y/N): y
----------------------------------------------------------------------
Press “y” to confirm the restore factory setting operation.
150