Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 14)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
2.2 Rear Panel
The rear panel of SHDSL.bis router is where all of the connections are made.
Port Description
DC-IN Power connector with 9V DC 1.0A
LAN (1 / 2 / 3 / 4) Ethernet 10/100Base-TX for LAN port (RJ-45)
CONSOLE RS- 232C (DB9) for system configuration and maintenance
LINE G.SHDSL.bis interface for WAN Port
RST The reset button, the router restore the default settings when press
this button until reboot.
!
The reset button can be used only in one of two ways.
(1) Press the Reset Button for one second will cause system reboot.
(2) Pressing the Reset Button for four seconds will cause the product loading the factory default
setting and losing all of yours configuration. When you want to change its configuration but
forget the user name or password, or if the product is having problems connecting to the
Internet and you want to configure it again clearing all configurations, press the Reset Button
for four seconds with a paper clip or sharp pencil.
13