Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 138)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
7.12.4 Bridge
You can setup the bridge parameters in bridge command. If the product is configured as a router,
you do not want to setup the bridge parameters.
Move the cursor “ >> “ to bridge and press enter.
>> gateway
Default gateway
static Static bridging table
You can setup default gateway IP via gateway command.
You can setup 20 sets of static bridge in static command. After entering static menu, the screen
will prompt as below:
>> deny_PCs
add
Deny PCs to access Internet
Add static MAC entry
delete Delete static MAC entry
modify Modify static MAC entry
list Show static bridging table
You can deny PCs to access Internet for security purpose.
After enter add menu, the screen will prompt as follow
>> mac
Configure MAC address
lan_port Configure LAN interface bridging type
wan1_port Configure WAN1 interface bridging type
wan2_port Configure WAN2 interface bridging type
wan3_port Configure WAN3 interface bridging type
wan4_port Configure WAN4 interface bridging type
wan5_port Configure WAN5 interface bridging type
wan6_port Configure WAN6 interface bridging type
wan7_port Configure WAN7 interface bridging type
wan8_port Configure WAN8 interface bridging type
137