Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 88)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
6.4 Administration
This session introduces security and simple network management protocol (SNMP) and time
synchronous.
6.4.1 Security
For system secutiry, suggest to change the default user name and password in the first setup
otherwise unauthorized persons can access the router and change the parameters.
There are three ways to configure the router: Web browser, telnet and serial console.
Press Security to setup the parameters.
For greater security, change the Supervisor ID and password for the gateway. If you don’t set them,
all users on your network can be able to access the gateway using the default IP and Password
root.
You can authorize five legal users to access the router via telnet or console. There are two UI
modes: menu driven mode and line command mode to configure the router.
87