Planet Technology G.SHDSL.bis Bridge Router GRT-504 User Manual
Page 42
GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
Username : Enter the user name exactly as your ISP assigned.
Password: Enter the password associated with the user name above.
Password confirm: Enter the password again for confirmation.
Idle Time: When you don’t want the connection up all the time and specify an idle time on this field.
IP type: A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;
the ISP assigns you a differnet on each time you connect to the Internet.
The screen will prompt the parameters that will be written in NVRAM. Check the parameters
before writing in NVRAM.
Press Restart to restart the router working with new parameters or press to continue setting
another parameter.
Set up : WAN1 VPI, VCI, Encap. and Protocol
WAN:
VPI: 0
VCI: 33
AAL5 Encap: LLC
Protocol: IPoA , EoA , IPoA + NAT or EoA + NAT
Click Next to setup the IP parameters.
For more understanding about NAT, review NAT/DMZ chapter.
Set up the WAN1 IP address, Subnet Mask, gateway and DNS Server
41