Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 111)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
7.4 Status
You can view running system status of SHDSL.bis, WAN, route, interface, fireware, ip_qos and stp
via status command.
Move cursor “ >> “ to status and press enter.
>> shdsl.bis
Show SHDSL.bis status
wan Show WAN interface status
route Show routing table
interface Show interface statistics status
firewall
ip_qos
stp
Show firewall status
Show IP QoS statistics
Show STP status
Command Description
shdsl.bis The SHDSL.bis status includes line rate, SNR margin, TX power, attenuation,
and CRC error of the product, and SNR margin, attenuation and CRC error of
remote side. The router can access remote side’s information via EOC
(embedded operation channel).
wan WAN status shows all their parameters including IP address ,Net mask, PVC
and protocol information
route You can see the routing table via route command.
interface The statistic status of WAN and LAN interface can be monitor by interface
command.
firewall The current and history status of firewall are shown in this command.
Ip_qos Show the current IP QoS statistics on LAN interface
stp Show the STP status on all LANs and WANs
7.4.1 Shdsl.bis
-----------------------------------------------------------------------------
Monitoring Window...
<SHDSL.bis Status>
Channel : A / B
SHDSL.bis Mode : CPE Side / CPE Side
Line Rate(n*64) : 0kbps / 0kbps
Current SNR Margin : 0dB / 0dB
Attenuation : 0dB / 0dB
CRC Error Count : 0 / 0
SHDSL Remote Side Status
Channel : A / B
Current SNR Margin : 0dB / 0dB
Attenuation : 0dB / 0dB
CRC Error Count : 0 / 0
-----------------------------------------------------------------------------
Show SHDSL.bis status includes the Mode, Line Rate, Current SNR Margin, Attenuation and CRC
error count on both side.
110