Planet Technology G.SHDSL.bis Bridge Router GRT-504 - Manual (Page 149)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
7.12.12 IPQoS
IP QoS is a function to decide the priorities of setting IPs to transfer packets under the situation of
overloading bandwidth.
To configure IP QoS function, move the cursor to IPQoS and press enter.
active Trigger IP QoS function >>
add Add IP QoS policy
delete Delete IP QoS policy
modify Modify IP QoS policy
list Show IP QoS policy table
Command Description
Active Enable the IP QoS function
Add Add parameters of IP QoS
Delete Delete the IP QoS parameter
Modify Modify the IP QoS parameter
List View the IP QoS configuration
When use the add command, it will show the following:
>> protocol
Configure protocol
local_ip Configure local IP parameter
remote_ip Configure remote IP parameter
Port Configure port parameter
description Policy description
Enable
Enable the policy
precedence Configure precedence parameter
Command Description
Protocol Set up the port protocol type (ANY, TCP or UDP)
Local_ip Configure the local IP address
Remote_ip Configure the remote IP address
Port Configure the port range
Description Define the description of policy
Enable Enable the policy
Precedence Define the priority of the policy
148