NEC EXPRESS 320Lb-R - Manual (Page 218)

7-18 Troubleshooting
On-screen error message Cause Action
0BD6 3rd SMBus device
address not
acknowledged
0BD7 3rd SMBus device Error
detected
0BD8 3rd SMBus timeout
-
(3rd SMBus does not exist)
0BD9 4th SMBus device
address not
acknowledged
0BDA 4th SMBus device Error
Detected
0BDB 4th SMBus device
timeout
CPU module board #2 is faulty.
0BDC 5th SMBus device
address not
acknowledged
0BDD 5th SMBus device Error
detected
0BDE 5th SMBus timeout
-
(5th SMBus does not exist)
0BDF 6th SMBus device
address not
acknowledged
0BE0 6th SMBus device Error
detected
0BE1 6th SMBus timeout
-
(6th SMBus does not exist)
0BE2 7th SMBus device
address not
acknowledged
0BE3 7th SMBus device Error
detected
0BE4 7th SMBus timeout
Back panel board is faulty.
0BE5 8th SMBus device
address not
acknowledged
0BE6 8th SMBus device Error
detected
0BE7 8th SMBus timeout
PCI module board #2 is faulty.
• Check cable connection.
• Replace the board.
0BF0 Vendor ID cannot be
retrieved from BP
IDPROM
0BF1 System Structure cannot
be retrieved from BP
IDPROM
Back panel board is faulty. Replace the back panel board.
0C00 Rompilot reports error
number xx
• Configuration error in
SETUP.
• CPU/PCI module board is
faulty.
• Re-configure Rompilot.
• Replace the CPU/PCI
module board.
8600 No working DQS value
found
• DIMM is faulty
• DIMM is not supported
• Replace DIMM
• Replace DIMM with
appropriate one.