NEC EXPRESS 320Lb-R - Manual (Page 221)

Troubleshooting 7-21
Linux Error Messages
NEC Express5800/ft series displays messages on the console window when failures occur. Also, the
same information is recorded as system logs.
The following indicates the syslog messages, messages on the console, their meanings and actions:
Message Meaning Action
FT[dev.no] opstate SIMPLEX to DUPLEX The status changed
from SIMPLEX to
DUPLEX
FT[dev.no] opstate ONLINE to DUPLEX The status changed
from ONLINE to
DUPLEX
FT[dev.no] opstate INITIALIZING to DUPLEX The status changed
from INITIALIZING to
DUPLEX
FT[dev.no] opstate BROKEN to DUPLEX The status changed
from BROKEN to
DUPLEX
FT[dev.no] opstate INITIALIZING to
DIAGNOSTICS The status changed
from INITIALIZING to
DIAGNOSTICS
FT[dev.no] opstate INITIALIZING to ONLINE The status changed
from INITIALIZING to
ONLINE
FT[dev.no] opstate ONLINE to INITIALIZING The status changed
from ONLINE to
INITIALIZING
FT[dev.no] opstate DIAGNOSTICS to
DIAGNOSTICS_PASSED Diagnostics have
completed
FT[dev.no] opstate UNKNOWN to INITIALIZING The status changed
from UNKNOWN to
INITIALIZING
The server is
operating
normally.
FT[dev.no] opstate SIMPLEX to BROKEN The status changed
from SIMPLEX to
BROKEN
FT[dev.no] opstate UNKNOWN to EMPTY The status changed
from UNKNOWN to
EMPTY
Contact your
sales agent.
FT[dev.no] opstate INITIALIZING to BROKEN Failed to start the
device Start the server
again. If the
problem persists,
contact your sales
agent.
FT[dev.no] operation BRINGUP failed Failed to start the
device. Start the server
again. If the
problem persists,
contact your sales
agent.