NEC EXPRESS 320Lb-R - Manual (Page 222)

7-22 Troubleshooting
Message Meaning Action
FT[dev.no] info error initializing PCI slots Failed to initialize the
PCI slot. There is no
problem if any
devices are not
connected to the
PCI slot. In other
cases, a board
may be faulty.
Contact your
sales agent.
FT[dev.no] info unable to access all offline memory
FT[dev.no] info unable to clear hardware reset
FT[dev.no] info unable to collect inventory
FT[dev.no] info unable to configure chipset
FT[dev.no] info unable to copy shadow memory
FT[dev.no] info unable to map BIOS
FT[dev.no] info unable to map firmware
FT[dev.no] info unable to power on CRU
FT[dev.no] info unable to read gpr0
FT[dev.no] info unable to set DIMM SPD
HW status is invalid. Contact your
sales agent.
FT[dev.no] info unable to read system MAC
address Unable to read MAC
address from the
device’s NIC. Contact your
sales agent.
FT[dev.no] info BIOS incompatible
FT[dev.no] info BIOS mismatch
FT[dev.no] info multiple BIOS miscompare
BIOS status is invalid. Contact your
sales agent.
FT[dev.no] info failed to update firmware
FT[dev.no] info firmware does not match
FT[dev.no] info firmware file error
FT[dev.no] info firmware image invalid
The device’s firmware
is invalid. Contact your
sales agent.