NEC EXPRESS 320Lb-R - Manual (Page 232)

7-32 Troubleshooting
used is 32.
“APIC error” is recorded in the syslog by the operations such as inserting/removing
disks:
→ A message “APIC error” may be recorded to the log or displayed on the screen
when you perform operations such as inserting/removing disks with the server
powered on, because the internal status managed by the OS and the actual status
on the server side are different. The operations are not affected.
“info synchronization error” is recorded while the CPU modules are being
synchronized:
→ A message “info synchronization error” may be recorded in the log when the CPU
modules are performing duplication because the internal status managed by the
OS and the actual status on the server side are different. The operations are not
affected.
“card reports no resources” log is recorded when using the built-in LAN board:
→ A message “card reports no resources” may be output to the log when the system
cannot allocate the resource for the LAN driver due to high load ratio on the
network access. The operations are not affected. LAN driver performs retry
automatically thus the system continues communication without disconnecting the
network connection.
“I/O error” is recorded in the syslog by the cable disconnection during the access to
the Fibre Channel disk:
→ When the Fibre Channel connected to the primary PCI module Cable is
disconnected during the access to the Fibre Channel disk, logs may be recorded,
which seem that “SCSI disk (/dev/sdd**)I/O error”(** represent numbers)
occurred on the devices which are not running because the internal status
managed by the OS and the actual status on the server side are different. The
operations are not affected.