NEC EXPRESS 320Lb-R - Manual (Page 56)

2-22 General Description
PCI#1 PCI#2
Status
LED 2
DISK
Access
LED
Status
LED 2
DISK
Access
LED
Description Action
Green Off Off Off The PCI module 1 is
performing diagnosis
(Diag).
AC power is not
supplied to the PCI
module 2. Wait for the OS to start. After
the OS starts, check the
Status LEDs and then take
the appropriate actions.
If the problem persists,
contact your sales agent.
(4) Status LED 1 of only PCI module 2 is red
PCI#1 PCI#2
Status
LED 2
DISK
Access
LED
Status
LED 2
DISK
Access
LED
Description Action
Amber Amber Off Off The PCI module 2 is on
standby (The PCI
module 2 has not been
powered on yet.)
The PCI module 1
operates in simplex
mode. Start the PCI module 2 from ft
server utility (See Chapter 5).
Remount the PCI module 2.
If the problem persists,
contact your sales agent.
Amber Amber Green Off The PCI module 2 is
performing diagnosis
(Diag).
The PCI module 1
operates in simplex
mode. Wait for the PCI module 2 to
start. When the PCI module 2
starts and duplex mode is
established, the indications
will return to normal.
Off Off Off Off Only the PCI module 2
is on standby (AC
power is supplied
through the cord, but
the system has not
been powered on yet.)
AC power is not
supplied to the PCI
module 1. Check if the power cord is
connected correctly.
Check the condition of
breaker and UPS.
Check if the power unit is
connected correctly.
Remount the PCI module 1.
If the problem persists,
contact your sales agent.
Off Off Green Off The PCI module 2 is
performing diagnosis
(Diag).
AC power is not
supplied to the PCI
module 1. Wait for the OS to start. After
the OS starts, check the
Status LEDs and then take
the appropriate actions.
If the problem persists,
contact your sales agent.