NEC EXPRESS 320Lb-R - Manual (Page 99)

System Configuration 4-17
See the table below for setup options on the screen.
Option Parameter Description Your Setting
On Board SCSI Disabled
[Enabled] Enable or disable expansion of SCSI
BIOS on the motherboard.
On Board LAN 1, 2 Disabled
[Enabled] LAN1: Enable or disable 10/100BASE
LAN controller on the
motherboard.
LAN2: Enable or disable 1000BASE
LAN controller on the
motherboard.
PCI Slot 1 - PCI Slot 3 Disabled
[Enabled] Enable or disable BIOS on a device
(board) connected to the PCI bus.
Select "Enabled" for the graphic
accelerator board. Select "Disabled"
for Option ROM of PCI LAN device
when the network boot feature is not
used. #1:
#2:
#3:
[ ]: Factory-set
IMPORTANT: For the slot which a graphical accelerator board is installed, do not specify
“Disabled”.