NEC EXPRESS 320Lb-R User Manual
Page 270
8-32 System Upgrade
5.
Hold the release lever of the PCI module and pull it off.
The PCI module is slightly pulled out toward you.
IMPORTANT:
Do not hold the other parts than the release lever to pull the module.
6.
Pull off the module halfway slowly. Pushing down the latch lever on the side to unlock it,
pull the module off the rack.
IMPORTANT:
Carefully handle the PCI module so that you will not drop it or strike
it against other server internal devices.
Release lever
Latch lever
7.
Carefully place the PCI module on the flat and sturdy table.
Avoid the dusty or humid place.
8.
Remove the two setscrews on the front of the PCI module and one setscrew on the back.
9.
Slide the top cover a little to remove it.
This allows you to access the devices in the PCI module. For more information on how to
handle these devices, see the associated sections.