Ricoh BIZWORKS 106 - Manual (Page 107)

89
TROUBLESHOOTING
6. TROUBLE-
SHOOTING
3 Push back the blue paper release lever
located on the right.
Note
The lever releases pressure on the paper. If
you do not push it back, you could damage
the machine when removing paper.
4 Pull out the misfed paper in the direc-
tions indicated by the arrows in the il-
lustrations.
Note
• If you are using the paper feed unit (op-
tion) and cannot clear the misfeed using
this procedure.
☛ Clearing a Micffeed in the Optional Paper
Feed Unit, see page 90.
• If toxner gets on your hands, wash them
immediately.
5 Install the toner cassette into the ma-
chine.
Note
• Be sure to hold the toner cassette by its handle.
• Keep the toner cassette horizontal to avoid
spilling the toner.
☛ Installing the toner cassette, see page 2.
6 Close the front unit.
Note
If “Clear Paper” is still displayed after you
clear the jam, there may be paper jammed in
another part of the machine. Check all areas
described in this section
Important!
If a paper misfeed occurs during a copy job, be sure to specify the desired copy
quantity again.