Ricoh BIZWORKS 106 - Manual (Page 229)

5
SETTING UP
1. SETTING UP
Other Settings for Type 2
To remove the protective sheet
1 Open the ADF cover (1) and then re-
move the protective sheet (2).
2 Close the ADF cover and make sure it
locks securely into place.
1
2
To install the document output tray
1 Look at the rear of the machine to con-
firm where the document output tray
should fit.
2 Insert the pin at one side of the tray by
gently bending the document tray until
it fits in the insert hole.