Ricoh BIZWORKS 106 - Manual (Page 220)

viii
Part Names
Type 1
The following describes the Type 1 machine. This information also applies
to the Type 2 machine, except where specifically noted in the next page.
Small size paper
feed access panel
This panel can be
lowered to provide
easier handling when
printing on or
copying to small size
paper.
Scanner lock
Locks the scanner to prevent
damage during transport.
Be sure to release this lock
before using the machine.
Power socket Second printer
(Additional Printer) port
You can connect a second printer
to this port.
Computer port
Connect your computer here.
SIMM cover
Open this cover
when you want to
install a SIMM and
expand memory.
Platen cover
Lift this cover to access the
exposure glass when you want to
place an original on it for
copying and scanning.
Exposure glass
Place originals on this
glass face down.
Operation panel
Key panel for controlling
the machine.
Output tray
Prints are delivered here. This tray
can hold up to 50 sheets.
Top release lever
Pull to release the top unit
and open it.
Upper paper tray
Holds up to 100 sheets
of plain paper.
Power switch
Turns the machine on and
off.
Output tray extension
Pull out to support paper output
from the machine.
Top unit