Ricoh BIZWORKS 106 - Manual (Page 400)

92
TROUBLESHOOTING
3 Push back the blue paper release lever
located on the right.
Note
The lever releases pressure on the paper. If
you do not push it back, you could damage
the machine when removing paper.
4 Pull out the misfed paper in the direc-
tions indicated by the arrows in the il-
lustrations.
Note
• If you are using the paper feed unit (op-
tion) and cannot clear the misfeed using
this procedure, use the procedure on page
93 instead.
• If toner gets on your hands, wash them im-
mediately.
5 Install the toner cassette into the ma-
chine.
Note
• Be sure to hold the toner cassette by its handle.
• Keep the toner cassette horizontal to avoid
spilling the toner.
• Refer to page 2 for details on how to in-
stall the toner cassette.
6 Close the top unit.
Note
If “Clear Paper” is still displayed after you
clear the jam, there may be paper jammed in
another part of the machine. Check all areas
described in this section
Important!
If a paper misfeed occurs during a copy job, be sure to specify the desired copy
quantity again.
b(GB)6.5_Chapter 06_p82-95 99.8.3, 1:18 PM 92