Ricoh BIZWORKS 106 User Manual
Page 342
34
FAXING
6
Press
. The display opposite will
flash briefly on the display and then the
function menu will reappear.
Note
Do not carry out any operations while “Reg-
istered” appears on the display.
7
Do one of the following:
• Enter another function number.
• Press
to return to standby mode.
1
Press
.
2
Press
.
3
Press
.
4
Press
.
Prt Help List
Function no.: _ _
12 Dial Mode
O
K
Mode: Tone?
O
K
Setting the Dial Mode
Specify the type of telephone line you are using (tone or pulse dial). If you
are unsure of what this should be, please consult your line provider.
If your machine is behind a PABX, you should also provide the following
details:
• The PABX number that gives you an outside dial tone—You can enter 0, or a value between 01 and
99 (00 is not possible).
• The PSTN access method. This will depend on your locale and the PABX system you are using.
The machine will not function correctly if these settings are not correct.
Consult your systems administrator if you are unsure.
1 Set up
O
K
Registered
b(GB)6.5_Chapter 04_p29-39
99.8.3, 1:14 PM
34