Ricoh BIZWORKS 106 - Manual (Page 155)

10
GETTING ACQUAINTED
Loading Paper
After you set up the machine and specify the paper size, you are ready to
actually load paper.
Important!
When loading paper into the upper paper tray, make sure that you load maximum
100 sheets of plain paper (80 g/m
2 or 20 lb). Overloading the upper paper tray can
cause misfeeds.
To load plain paper into the upper paper tray
1 Fan the stack of paper to make sure that
all pages are free and are not sticking
together. The upper paper tray holds up
to 100 sheets of plain paper (80 g/m
2
or 20 lb).
2 Straighten up all four sides of the stack,
by tapping them on a desk or table top.
3 Set paper into the upper paper tray.
Make sure that the top of the stack is
not higher than the limit mark on the
tray guide.
4 Squeeze the tray guide and slide it
against the edge of the stack.