Ricoh BIZWORKS 106 - Manual (Page 181)

36
COPYING
5 Stretch the extend tray that supports the
originals.
Originals that do not meet the following requirements can cause paper misfeeds,
and even damage the machine.
■ Requirements
• Thickness 0.05mm to 0.2mm (0.002" to 0.08")
• Weight 60 to 90 g/m 2 (16lb to 24lb)
• Clear markings Markings on the originals must be clear to be read
correctly.
• Uniform page size All pages should be the same size.
• Page condition Avoid using originals that are bent, curled, damaged,
or stapled, and originals printed on coated paper,
carbon paper, or photographic paper.
6 Press to perform the copy op-
eration.
Note
• If an original becomes misfed during feed-
ing by the ADF, press to stop the op-
eration. Refer to“Clearing a Paper
Misfeed” on page 43.
• We recommend to use the TEXT mode when
copying with the ADF.