Ricoh BIZWORKS 106 - Manual (Page 257)

33
COPYING
4. COPYING
Adjusting the Copy Image
To select the resolution/photo setting
1
Lift the platen cover (1). Place the
original face down at the arrow mark
on the scale (2). Close the platen cover
(3).
2 Press the Copy Mode key to specify the
resolution or halftoning method for the
copy operation.
3 A pointer (
T
) moves on the display to
indicate the current setting.
1
3
2
4 Press to perform the copy op-
eration.
Note
Press to clear the setting after
copying.
The following describes when you should use
each setting.
Setting Use for:
[Text Fine] Copying text
[Photo1] Copying photographs
[Photo2] Copying mixed text and photographs
Note
If the memory size of your machine is 4MB, the machine automatically switches
from Photo2 to Photo1 in the following cases.
♦ when the (Type 1) or (Type 2) key is on
♦ when you make multiple copies using the ADF (Type 2 only)