Ricoh BIZWORKS 106 - Manual (Page 58)

40
FAXING
Dial number
Sending Faxes
How to Send a Fax
This is the basic procedure for sending a fax message. For detailed informa-
tion and explanations of the advanced features available, see the following
pages:
☛ Economy Mode, see page 105.
☛ Quick Dials, see page 53.
☛ Name Dials, see page 58.
☛ Redialling a Number, see page 43.
☛ Entering Pauses and Tones in Fax Numbers, see page 42.
1
Check that the standby display is shown.
• If the display is blank, press any key to exit
Economy mode.
2
If necessary, press to switch to
fax operation mode.
3
Carefully insert the document stack
face-down into the ADF until the display
changes to “Dial number”.
• Make sure this message appears. If it does not,
your document will not be scanned from the ADF.
100% 01
Dial/Set orig.