Ricoh BIZWORKS 106 - Manual (Page 33)

15
GETTING ACQUAINTED
2. GETTING
ACQUAINTED
Loading Other Media
Use the following procedures to load envelopes, transparencies, and label paper.
Loading Envelopes
Load up to 5 envelopes at a time using the same procedure for loading small
size paper on page 13.
• Insert envelopes print side up with the stamp
position as shown.
• Envelope flaps should be securely folded down, so the envelope is “closed”.
This is especially important when printing on envelopes with adhesive on the
flaps because heat generated during the printing process can cause the adhe-
sive to melt and get on rollers.
☛ Refer to the paper select operation on page 14.
Loading Transparencies
Load only one transparency at a time using the plain paper loading proce-
dure on page 10 for large transparencies, and the small paper loading proce-
dure on page 13 for small transparencies.
☛ Refer to the paper select operation on page 12 for large transparencies or
page 14 for small ones.
Loading Label Paper
Load only 10 sheets of label paper at a time using the plain paper loading
procedure on page 11.
☛ Refer to the paper select operation on page 12.