Ricoh BIZWORKS 106 - Manual (Page 328)

20
GETTING ACQUAINTED
Changing the Paper Size
Use the following procedure to set the positions of the paper guides inside
the paper tray for either A4 or Letter paper.
1 Squeezing in on both sides of the front
guide, slide it to the correct position
for the desired paper size.
2 Squeezing in on both sides of the side
guide, slide it to the correct position
for the desired paper size.
Specifying the Paper Size
After you install the paper feed unit (option), you can select between the
upper paper tray and the paper feed unit as the paper source, and specify
the size of paper in the paper feed unit.
1 Press .
2
Press .
3
Press .
Prt Help List
Important!
Whenever you change the paper size, be sure to also specify the paper size using
the procedure below.
61 Tray Pap.Size
Function no.: _ _
b(GB)6.5_Chapter 02_p10-24 99.8.3, 1:13 PM 20