Ricoh BIZWORKS 106 - Manual (Page 378)

70
5. COPYING
Making a Copy
1
Lift the platen cover (1). Place the
original face down at the arrow mark
on the scale (2). Close the platen cover
(3).
Alignment of Originals
Align the original with the scale of the exposure glass.
• When the original is a standard size such as
A4 or Letter, align it to the indexes on the scale.
• When your original is not standard size, align
the upper left edge of the original to the ar-
row mark on the scale.
2
1 3
2
Press to perform the copy opera-
tion.
Important!
After copying a large number of pages, wait a couple of minutes before attempting
to turn off the machine.
Note
When printing to label paper, envelopes, transparencies, or thin paper (60 g/m 2
or 16 lb), remove each printout as it comes out of the machine. If you don't,
printed output can fall out of the output tray, and become curled.
b(GB)6.5_Chapter 05_p70-75 99.8.3, 1:17 PM 70