Ricoh BIZWORKS 106 - Manual (Page 350)

42
FAXING
5
Dial the fax number in one of the fol-
lowing ways:
• On the numeric keypad.
E.g. press .
• Press a Quick Dial key with a number stored in it.
E.g. press ( ).
• Press then enter the first letter of a previ-
ously stored Name Dial.
E.g. press then press until the Name
Dial you require appears.
6
Press .
If you set your document in the ADF, the machine
dials the fax number and sends your fax message.
If you set your document on the exposure glass in
step 7 , you now need to do the following steps:
7
To select the length of your document,
press or until a
suitable length appears.
8
Press or .
The machine dials the fax number.
When the connection is established, if the other party
has registered it, their CSI will be displayed. If no CSI is
registered, "Transmitting" will appear instead.
After the machine has scanned your document, the
displays opposite will appear:
: Vert.: A4?
Dialing...
Dialing...
12345678_
B: XYZ CO.
ABC CO.
b(GB)6.5_Chapter 04_p40-46 99.8.3, 1:15 PM 42