Ricoh BIZWORKS 106 - Manual (Page 355)

47
FAXING
4. F
A
XING
● Receiving calls in TEL Mode
When the machine is switched to TEL mode, follow these steps to answer
incoming calls.
Mode: Recep.? O K
Connecting ...
Telephone call
1
When the machine rings remove all
documents from the ADF then, press
or lift the handset and listen.
• If you hear a voice and you lifted the habdset,
continue the conversation as normal and replace
the handset when finished.
• If you hear another fax machine, make sure the
machine is in fax operation mode (press Fax/
Copy if necessary), then go to step 2.
2
Press then press or
until the display opposite
appears .
3
Press and replace the handset.
The machine will start receiving the message.
● Switching between FAX Mode and TEL Mode
Press the Reception Mode key to switch
between FAX mode and TEL mode.
b(GB)6.5_Chapter 04_p47-53 99.8.3, 1:15 PM 47