Raymarine C Series - Manual (Page 102)

88 C-Series Display Reference Manual
Showing or hiding a route or a track
You can define which routes or tracks are shown or hidden from the screen. When a
route is set to HIDE, the route line is not displayed. The display of waypoints within a
hidden route depends however on the show/hide waypoint setting (see
page 87 ). The
active route is always displayed irrespective of the display status.
Note: The show/hide status of a route or track applied to a chart window that is set to
system view, will be displayed in all other system view chart windows.
... using the cursor
You can use the cursor method to hide a route or track.
Note: Use the route/track list to return the display status to SHOW.
... via the route/track list
You can show or hide a route /track via the appropriate list:
1. Select the Show/Hide Route or Show/Hide Track option:
2. Select required route or track:
D8390_1
HIDE ROUTE
HIDE TRACK
Move cursor over
appropriate route
Move cursor over
appropriate track
Routes
Tracks
Or
TRACK
RTE
D8388-1
SHOW/HIDE
ROUTES…
ROUTES…
Routes
Tracks
SHOW/HIDE
TRACKS…
TRACKS…
Or:
81221_4.book Page 88 Tuesday, February 28, 2006 5:24 PM