Raymarine C Series - Manual (Page 82)

68 C-Series Display Reference Manual
4.11 Editing routes
Once you have created a route, it can be edited in a variety of ways. You can:
• Reverse a route (see page 65 )
• Amend the course of a route (see page 69 ).
• Change the name of a route (see page 73 ).
• Change the color of a route (see page 73 ).
• Erase a route (see page 73 ).
Note: An active route can be edited, with the exception of the target waypoint. If a
waypoint being edited becomes the target, then the system shall cancel the edit; the
waypoint shall remain in its original position.
Selecting a route for editing
For a route to be edited it must first be selected either via the route list or by selecting
the appropriate route on-screen.
... via the route list
You can now edit the route as described on page 69 .
... with the cursor
You can now edit the route as described on page 69 .
D8998_1
Toggle as required
and/or ROUTE DETAILS...
TIME
ETA HOURS
SOG
ACTUAL PLANNED
ROUTES ...
REVIEW AND
EDIT ROUTES ...
Highlight required route
D8369_1
D8370_1
REVIEW AND EDIT
THIS ROUTE
Route 3
Move cursor over
required route
RTE
81221_4.book Page 68 Tuesday, February 28, 2006 5:24 PM