Raymarine C Series - Manual (Page 116)

102 C-Series Display Reference Manual
Selecting the zoom factor
When the zoom function is active (ZOOM ON or ZOOM SPLIT), you can select either
a predefined zoom factor or you can adjust the zoom factor manually.
Pre-defined zoom factor
Select x2, x3 or x4 for a predefined zoom level. The greater the factor, the smaller
the area you are viewing and therefore the smaller the zoom box. These factors are
proportioned to the range e.g.
Manual zoom adjustment
To manually adjust the range shown in the zoom window:
Adjusting the position of the zoomed area
When the zoom function is selected, the system automatically selects the zoom
position so that the bottom details are always in the lower half of the display. If
required you can reposition the portion of the image to be zoomed so that an
alternative area is displayed.
With the zoom function set to ON or SPLIT:
Note: Selecting Zoom automatically switches off Bottom Lock and A-Scope images.
D8835_1
x2
Zoom factor
x3 x4
ZOOM...
Toggle to x2, x3 or
x4 zoom factor
ZOOM FACTOR
x2
OK
D8836_1
Toggle to xR zoom
factor
ZOOM FACTOR ZOOM FACTOR
20ft
ZOOM FACTOR
10ft xR
OK
D8837_1
e.g. e.g.
Highlight soft key Adjust the zoom
factor as required
D8444_1
ZOOM START
29ft
Highlight soft key Reposition zoomed
image as required
OK
ZOOM START
31ft
ZOOM POSITION
AUTO MAN
e.g. e.g.
81221_4.book Page 102 Tuesday, February 28, 2006 5:24 PM