Raymarine C Series - Manual (Page 55)

Chapter 3: Working with Waypoints 41
Erasing a group
You can erase any waypoint group from the system except the group containing the
active waypoint.
When a waypoint group is erased, the group name together with all of the waypoints
in that group are erased from the system with the exception of:
• ‘My Waypoints’ - the waypoints contained within this group are deleted but the
group name remains.
• Waypoints used in routes within your system.
You should therefore ensure that any individual waypoints that you want to keep
(which are not part of a route), are moved before their group is erased.
1. Display the group list (see
page 38 ).
2. Select and erase the group:
Note: Waypoint groups can also be erased via the ARCHIVE AND TRANSFER function
as described on page 37. For details of how to erase waypoint groups from a card, see
page 21.
3.9 Controlling waypoint display
When you have placed many waypoints on your system, it may become difficult to
easily interpret chart or radar information. This is particularly the case if you have many
waypoints in a small area. There are a number of ways that you can control the display
of waypoints and waypoint information in chart and radar windows. These are:
• Show or hide waypoints with a particular symbol.
• Show or hide waypoints belonging to a specific group.
• Show or hide all of the waypoint names.
• Show or hide the index of a waypoint within a route - chart only (see
page 87 ).
Show/hide waypoint names
You can show or hide all waypoint names if required:
D8302_1
ERASE GROUP... YES
My Waypoints
Deep fishing
Shallow fishing
Reef fishing
GROUP LIST
Highlight page
set for editing
Confirm the pop-up
message
D8306_1
PRESENTATION...
SHOW/HIDE
WAYPOINTS...
WAYPOINT NAME
Select status
ON
81221_4.book Page 41 Tuesday, February 28, 2006 5:24 PM