Raymarine C Series - Manual (Page 208)

194 C-Series Display Reference Manual
Cleaning the display
CAUTION: Cleaning the display
Take care when cleaning the display, to avoid damaging it.
(1) Do NOT wipe the display screen with a dry cloth, as this could scratch
the screen coating.
(2) Do NOT use acid, ammonia based or abrasive products.
Regularly clean your Display as follows:
1. Switch off the power to the Display.
2. Wipe the Display with a clean soft cloth. To remove oily finger marks use a spray
cleaning agent of the type used for cleaning eyeglasses.
A suitable micro-fibre cloth is supplied with your display and spray can be purchased
from your local optician.
13.3 Resetting the Display
You can reset the C-Series Display in several ways:
• Settings reset.
• Settings and data reset.
Settings reset
All system set-up menus, including page sets and the data bar are reset to the factory
default, when you apply a settings reset. Your waypoints, routes and tracks are NOT
removed.
Applying a settings reset
To apply a settings reset:
The system resets and returns you to the power on procedure.
D8662_1
MENU
Highlight System
Setup menu
Select System
Setup menu
Position mode...
ID Setup...
Simulator...
Bearing Mode...
MOB Data Type...
Manual Variation...
Language...
Extendeded Charater Set...
Ground Trip Reset
Settings And Data Reset
Lat/Long
ON
True
Position
Auto (01
o E)
00 o English (US)
OFF
System Setup Menu
Settings Reset
Highlight Settings Reset
Select settings
reset
Yes
Setup
Radar Setup...
GPS Status...
Compass Setup...
System Setup...
81221_4.book Page 194 Tuesday, February 28, 2006 5:24 PM