Raymarine C Series - Manual (Page 167)

Chapter 7: Using the data application 153
To select a pre-configured data panel:
Customize the panels
You can customize each panel by changing:
• The panel name.
• The size and number of data cells
• The data contained in each cell. This data can include any transducer or internally
calculated navigation data that is available on NMEA or SeaTalk. Additional data
includes a compass rose, a distance log and four resettable trip counters.
• How the data is displayed. You can control whether the data is displayed in numer-
ical, digits, gauge or graphical format as appropriate to each data item.
Note: You can also configure the data panels in this way in the Engine Monitoring and
CDI applications.
Renaming a panel
You can customize the names of the panels as required e.g. the SAILING panel could be
renamed RACING:
1. Select and rename the appropriate panel:
2. Save the changes:
D8466_1
ACTIVE
Move control
to Digital Data
window Select required
panel type
Selected panel type
displayed
e.g.
Select page including
Digital Data application
WAYPOINT
D8732_1
RENAME PANEL... SAILING
Press and hold soft key
of panel for renaming
e.g. e.g.
,
To rename the panel use:
and/or
Rename Instrument panel
Soft key
Panel name Raci
D8733_1
OK OK
e.g.
To return to
panel soft keys
Soft key changes to reflect renamed panel
NAVIGATION WAYPOINT ROUTE FISHING Racing
81221_4.book Page 153 Tuesday, February 28, 2006 5:24 PM