Raymarine C Series - Manual (Page 120)

106 C-Series Display Reference Manual
Pausing the scrolling image
You can pause the display to see a ‘snapshot’ of the image. When a display is paused,
scrolling stops but the depth indication continues to be updated.Scroll pause/resume
affects the currently selected fishfinder frequency (200kHz, 50kHz or BOTH).
If you are in dual frequency mode (see page 114 ), you can pause one frequency while
the other continues to scroll. This allows you to inspect a paused image, place
waypoints or VRMs, while the other frequency continues to scroll and detect fish etc.
When in automatic frequency mode and the depth changes, the new frequency will
NOT be paused.
To pause or resume scrolling:
Changing how the depth digit is displayed
The depth under the boat is displayed in the upper or lower left hand corner of the
fishfinder window. The size of this depth digit can be adjusted or it can be switched on/
off for individual fishfinder windows.
Changing the size/position of the depth digit
You can decrease the size of the depth digit (to small or medium) and you can change
its position to the top of the screen e.g.
To change the depth digit size/position:
D8449_1
PRESENTATION...
SCROLL
PAUSE RESUME
OK
Toggle as required
Depth Digit Size - LARGE
Depth Digit Position - BOTTOM Depth Digit Size - SMALL
Depth Digit Position - TOP
D8451_1
81221_4.book Page 106 Tuesday, February 28, 2006 5:24 PM