5 marking a position on the radar screen, 6 changing what you see in the radar window, Setting the orientation of the radar – Raymarine C Series User Manual

Page 140

Advertising
background image

126

C-Series Display Reference Manual

from the coastline. Although the coastline may be much nearer, it may not appear
on the radar until the vessel is closer to shore.

• Some targets, such as buoys and small boats, can be difficult to discern, because

they do not present a consistent reflecting surface as they bob and toss about in the
waves. Consequently, these echoes tend to fade and brighten and at times, to dis-
appear momentarily.

• Buoys and small boats often resemble each other, but boats can often be distin-

guished by their motion.

6.5 Marking a position on the radar screen

You can mark a position by using a waypoint. Waypoints are positions marked on the
screen as a reference or destination point and are stored in the Waypoint list. They can
also be used to build routes and assist in passage planning.

Waypoints are placed on the radar screen via the WPTS/MOB button in the same way
as they are placed on a chart.

You can edit waypoints and navigate to waypoints in the radar window

For full details on using waypoints and passage planning see

Chapter 3:Working with

Waypoints

and

Chapter 4:Using the Chart

.

6.6 Changing what you see in the radar window

The radar screen can be tailored to your particular needs. You can:

• Change how the radar is orientated (see

page 126

).

• Change where your boat is positioned (motion mode) in relation to the radar (see

page 128

).

• Show or hide waypoints (see

page 42

).

• Show or hide range rings (see

page 130

).

• Change the bearing mode for EBLs (see

page 130

).

• Show AIS targets.

Setting the orientation of the radar

The orientation of the radar refers to the relationship between the radar and the
direction that you are travelling in. There are three orientation modes to choose from:

• Head up.
• North up.
• Course up.
These orientation modes are used in conjunction with motion mode (see

page 128

) to

control how your boat and radar relate to one another and how they are displayed on

81221_4.book Page 126 Tuesday, February 28, 2006 5:24 PM

Advertising