190 c-series display reference manual – Raymarine C Series User Manual

Page 204

Advertising
background image

190

C-Series Display Reference Manual

This screen provides, for each tracked satellite, the satellite number, a graphical signal
strength bar, status, azimuth angle and its elevation angle from your vessel. The sky
view graphic shows the position of these satellites.

Positional accuracy is dependent upon these parameters; in particular, the azimuth
and elevation angles are used in a triangulation process to calculate your position.
Horizontal Dilution of Position (HDOP) is a measure of this accuracy; a higher figure
signifies a greater positional error. In ideal circumstances, the figure should be in the
region of 1.0.

Selecting the satellite differential system
You should select the satellite group(s) appropriate to your area, via the Other Set Up
soft key:
• WAAS - United States
• EGNOS - Europe
• MSAS - Japan
• GAGAN - India

Note: The EGNOS, MSAS and GAGAN systems may not currently be active. Check with
your local government for operational status.

DIFF SET UP

OTHER SET UP

RESTART GPS

DIFF GPS

ON OFF

D6809_3

Actual mode
GPS reporting
(No Fix, Fix, D
Fix or SD Fix)

Mode
selected
by GPS

Only available if connected to
Raymarine landbased GPS e.g. 114

DIFF SET UP

D8715_1

GPS Setup Menu

Datus WGX

1984

COG/SOG Filter Medium

EGNOS OFF
MSAS

OFF

GAGAN OFF

WAAS

ON

Highlight satellite
group

Highlight
ON or OFF as
appropriate

Select group

OK

ON
OFF

OTHER SET UP

81221_4.book Page 190 Tuesday, February 28, 2006 5:24 PM

Advertising