Raymarine C Series - Manual (Page 54)

40 C-Series Display Reference Manual
4. Determine the group that the waypoint is to be moved to:
5. Select waypoint to be moved:
Note: Alternatively, waypoints can be moved from Group B to Group A if required. The
soft keys reflect this accordingly.
Renaming an existing group
You can change the name of an existing waypoint group:
1. Display the group list (see
page 38 ).
2. Select the group for renaming:
3. Edit the selected group name:
Note: To revert to the original name whilst editing, press CANCEL.
D8298_1
OK
Fishing
GROUP LIST
My Waypoints
Waypoint 1
Waypoint 2
Waypoint 3
MOVE BETWEEN GROUPS
GROUP A GROUP B
SELECT GROUP B
My Waypoints
Deep fishing
Shallow fishing
Reef fishing
GROUP LIST
Move control to
Group B
Select group to
add waypoint to
D8299_1
OK
Fishing
GROUP LIST
My Waypoints
Waypoint 1
Waypoint 2
MOVE BETWEEN GROUPS
GROUP A GROUP B
Waypoint 3
MOVE WAYPOINT
FROM A TO B
Move control to Group A.
Select required waypoint.
Repeat until all changes made
D8300_1
RENAME GROUP...
My Waypoints
Deep fishing
Shallow fishing
Reef fishing
GROUP LIST
Select required
group
D8301_1
Edit name
OK
EDIT GROUP
NAME
Save new
name
NEW WAYPOINT
G
81221_4.book Page 40 Tuesday, February 28, 2006 5:24 PM