Raymarine C Series - Manual (Page 221)

Appendix A: Specification 207
Data features
Engine monitor features
Visit www.raymarine.com for a list of compatible engines.
Navtex features
AIS features
Interfacing
Panel type 5 panels available. Pre-defined (Navigation, Waypoint, Route,
Fishing or Sailing) or user-configured.
Data available Vessel position, active waypoint, TTG, VMG - Waypoint, depth,
COG SOG, heading, speed, set/drift, trip, log, ground log, ground
trip, rudder, local time and date, sea temperature, app wind, true
wind, VMG wind, ground wind, XTE, compass, locked heading,
waypoint data, pressure, air temperature, sea temperature, local
data.
Panel type 5 panels available. Pre-defined (engine, engine and fuel, fuel
resources, engine and resources, twin engines or triple engine sup-
port) or user-configured.
Data available Tacho, boost pressure, alternator, oil pressure, coolant tempera-
ture, engine hours, fuel level (tanks 1 & 2), fuel rate, total fuel, load.
Alerts Incoming message (selectable categories)
Message list Sorting
Target symbols Sleeping, activated, selected, dangerous and lost.
Target information AIS vectors, safety critical data and full AIS data.
Collision avoidance Safe zones and safety messages.
Alarms Local alarm messages, lost targets
DSM connection For communication with DSM High Definition Fish Imaging
(HDFI)
NMEA 0183 Input GLL, GGA, GLC, GTD, VTG, BWC, BWR, RMA, RMB, RMC,
XTE, VHW, HDG, HDM, HDT, DBT, DPT, APB, VLW, MWV,
WPL, RTE, DSC and ZDA.
Selectable to 4800, 4800 Navtex, 9600 Navtex or 38,400
AIS
NMEA Output - User
selectable
APB, BWC, BWR, DBT, DPT, GGA, GLL, MTW, RMA, RMB,
RMC, RSD, TTM, VLW, VHW, VTG, WPL, VHF/DSC and ZDA
81221_4.book Page 207 Tuesday, February 28, 2006 5:24 PM